rogerthebodger
Well-Known Member
My forward head is very similar to yours with just a simple pipe and anti siphon fitting between pump and sea cock.
I had a blockage that would stop the pump in its tracks but would release after a little time. I removes all the pipes and anti siphon several time but could not find any blockage. As last resort I get my scuba cylinder and blew the pipe through with full pressure. This cleared the blockage after the sea cock that was directly screwed to the skin fitting.
My conclusion was that some critters had grown to such an extent in the outlet after the seacock that any hard stuff or paper would catch on the critters and cause the blockage until the water dissolved the paper etc thus releasing the pumped pressure. This was confirmed at my last pull out as others had a similar partial blockage with marine growth.
I had a blockage that would stop the pump in its tracks but would release after a little time. I removes all the pipes and anti siphon several time but could not find any blockage. As last resort I get my scuba cylinder and blew the pipe through with full pressure. This cleared the blockage after the sea cock that was directly screwed to the skin fitting.
My conclusion was that some critters had grown to such an extent in the outlet after the seacock that any hard stuff or paper would catch on the critters and cause the blockage until the water dissolved the paper etc thus releasing the pumped pressure. This was confirmed at my last pull out as others had a similar partial blockage with marine growth.