AIRFLY
New Member
Hello all, I bought a motor boat which has a Trimble Echo XL GPS data repeater installed on instrument dashboard.
The problem is that there is nothing connected at the end of repeater cable, there is only a 10 or 12 pin (now I don't remember) simple connector, anyone can help me with an user manual or drawing?
I found 12V supply wires and I check that the repeater powers on correctly, but I don't found the NMEA data input wires.
I already contacted Trimble either in Italy where I live and in USA but they was unable to help me.
Thank you in advance and best regards
Giovanni
The problem is that there is nothing connected at the end of repeater cable, there is only a 10 or 12 pin (now I don't remember) simple connector, anyone can help me with an user manual or drawing?
I found 12V supply wires and I check that the repeater powers on correctly, but I don't found the NMEA data input wires.
I already contacted Trimble either in Italy where I live and in USA but they was unable to help me.
Thank you in advance and best regards
Giovanni