Trident Voyager 35

[Figheadair]

After sailing a Twister for many years we acquired a Trident Voyager 35 and covered 800 nm last year.
However had a few problems-steering box failed, bulkhead needed replacing-both sorted.
On sorting the bulkhead had occasion to pump out approximately 6 gallons of water from below the engine which does not appear to be removed by the bilge pump.
Has anyone any knowledge of the construction of the Voyager regarding this problem?
Does anyone know where I can get construction drawings?

 

[Jcorstorphine]

I was looking at a Trident Voyager 30 and noticed that the main port bulkhead had been beefed up with ~20 mm ply on both sides where the top shroud anchor point comes through the deck. From what I have gathered, the deck plate were a source of leaks.

 

[Eeyore]

I have a Warrior.......same hull. The fuel tank was originally under the engine 'floor'. Most owners have done away with that and fitted the fuel tank elsewhere, leaving the void in the keel as a bilge. On mine there is a 2" hole fwd of the engine and another behind, through which passes the bilge pump suction hose, so all water is pumped out.

You might want to add your details to the Voyager owners site.......http://warrior35.co.uk/node/1429