Tool Kits - What do you have in yours?

Q

Quigs

Well-Known Member
Joined
5 Sep 2006
Messages
93
Visit site
I have just taken delivery of my 2000 Searay 260 and before I decide to take it out, I feel I should be carrying some degree of tools in case any any unforseens. Therefore I would like to make up a tool kit which will cater for routine repairs (not a full engine strip down), and would like some suggestions as to what to include. Thanks
 
What do you fix yourself as opposed to when do you shout for Sea Start or what have you?

Among my tools are:

No 1 Adjustable or hammer
No 2 Adjustable, or Mole Wrench
No 3 Adjustable or pliers
Sockets to fit any nut/bolt you expect to need to get at, with extension bar and ratchet to suit. Spark plug sockets if required
Wire cutter/stripper/crimper
Phillips/Pozi/flat blade screw driver or bits and holder
Summat to pull out an impeller
Multimeter

I do most of my own servicing. Don't forget that there are consumables as well, spare belts/plugs etc as you might require. Its a long topic and some will have far more comprehensive sets.
 
get 2 large waterproof boxes

in one put all your tools - the other starts empty.

everytime you use any tool on the boat put it back in the empty box

2 seasons later stop carrying the first box


alternatively -

set of ratchet combi spanners (halfords used to do a wicked set)

set of offset rings - 6mm - 22mm

3/8ths sockets - preferably including the really clever handle that can be used push pull as well as conventionally (draper?)

1/4" mini socket set inc bit driver

dremel

hammer

mini crowbar

big screwdrivers (bit drivers handle the normal use)

hacksaw

multimeter

wire strippers

electrical bladed screwdrived (blocks etc)

crimp tool and crimps

then

duck tape

epoxy (leak fix or similar)

radiator hose repar bandage (halfords)

self amalgamating tape

set of spares for engine

set of soft wood bungs
 
Aside from the usual weapons of choice, I try not to get parted from a compact torch and a pair of forceps. Both of which are used mainly for getting back the stuff I inevitably drop in the darkest recess of a bilge.

If you go minimalist, a multi-tool and adjustable spanner will get you out of most tricky situations. And of course, all boaters should carry a knife or three - one with serations for quickly cutting thicker ropes is good.
 
+ A mirror on a stick, magnet on a string,wind up torch and a hooky thing made from a welding rod or coat hanger type material for hooking things etc etc! /forums/images/graemlins/smile.gif
 
spare propeller
Prop wrench/socket

Overalls

Metal flask of petrol/diesel for a quick filter change(by filling with fuel there is no need to bleed)

Telescopic garden loppers will cut through 1 1/2 inch of lobster pot rope in seconds.
 
Bloody hell - looks like Ill be making some modifications to the seating arrangement to allow for the extra tool storage. Those green plastic garden storage sheds Ive seen at B&Q could be far more useful than a row of seats!
 
Thats why I suggested telescopic. /forums/images/graemlins/smile.gif

They are on offer at this time of year you can buy a pair for £4.

/forums/images/graemlins/cool.gif
 
Definitely a spanner of some kind to do up the bung when you've left it out and need to jump in the water to put it in... Not that I've ever had to do that of course...

Chris
 
Why does it take hours to drain out when it only took 10 mins to get in /forums/images/graemlins/confused.gif


Not that I have done that either /forums/images/graemlins/blush.gif
 
Phillips/Pozi/flat blade screw driver or bits and holder


hope you carry more than one of each size. Screwdrivers are the first things to go swimming or grabbed from you by the bilge troll.
 
Don't think this has been mentioned yet:

The most useful thing I carry is a mix sized bundle of cable ties. Very useful for temporary fixing or even semi permanent.

I carried out a repair once with a tie that was still in place, and doing its job 4 years later when I finally found a replacement part.
 
..........and a telescopic magnet

Telescopic_Pen.jpg
 
A few other things that often come in handy;

1) A 12Volt inspection lamp (I bought a sealed one from Halfords a long time ago and it's lasted all kinds of use on-board)

2) A set of vernier calipers - quite often I've needed to take the measurement of a plug, shaft or bolt and this is by far the most convenient way.

3) A cheap set of electrical crimps/pliers/strippers with an assortment of crimp connections is handy for emergency electrical repairs.

4) Don't forget the standard issue family-size can of WD40!

Most other things have been said I think.

Cheers,
Paul
 
Cheapo B&Q toolkit (it will rust away in a few seasons, so no point in spending megabucks) containing:
Socket set
Screwdriver set
driver bits
pliers/sidecutters
jewellers screwdrivers
spanners 8mm - 17mm

In a separate toolbag:
hacksaw
hammer
club hammer
gerase gun
oil fill adaptor for outboard leg
superglue
instant gasket
insulating tape
self amalgamating tape
threadlock
silicone grease
silicone spray
crimping tool (proper one)
crimps
3 boxes of s/s fasteners (self tappers, bolts, nuts washers)
box of assorted washers
box of fasteners (poppers, 'lift the dot' eyes etc)
staple gun (no idea why)
araldite
set of fids and splicing needles
gas soldering iron
tie wraps
WD40
Duct tape
Adjustable spanners
Adjustable pliers
Injector removal tool
Impellor removal tool
small spanners 4mm - 10mm
Allen keys
feeler guages
stanley knife
mulitimeter
choc blocks
wire (various sizes)
wire brush
file
magnet on a spring pole
springy grabber thing
mini spring grabber thing (about 6" long)
mirror on a telescopic pole

I used to have a woodsaw and a set of chisels, for some reason, but I never replaced them when they went rusty as I couldn't remember why I had them.
 
You must log in or register to reply here.

Share this page

Top