Toilet plumbing fittings - where to buy

[affinite]

I have a large "heads" project in the planning stage.
Anyone have any recommendations for best prices on fittings, hose, diverter valves, clips etc ?
Have looked at TekTanks but they are a bit pricey.
Thanks in advance
Steve

 

[Talulah]

Leesan
http://www.leesan.com/

 

[sailorman]

Stansa Plastic Fabrications
Joe Poulson
Ipswich based
01473312186
fax 01473402011

 

[prv]

I generally go to ASAP Supplies, though I wouldn't like to guarantee they're the cheapest.

Pete

 

[pvb]

Depending on what you need, Penguin might be worth a look.

 

[sailorman]

Depending on what you need, Penguin might be worth a look.

Stansa make what ever shape is req

 

[pvb]

Stansa make what ever shape is req

They make plumbing fittings?

 

[Cloven]

As others have said, LeeSan or ASAP. When fitting my holding tank set-up, I used bits from both, whichever was the cheaper for what I wanted.

 

[sailorman]

They make plumbing fittings?

Tanks

 

[pvb]

Tanks

Ah, right. But the OP was asking about fittings, not tanks, wasn't he? You can see why I'm confused.

 

[Tranona]

I have a large "heads" project in the planning stage.
Anyone have any recommendations for best prices on fittings, hose, diverter valves, clips etc ?
Have looked at TekTanks but they are a bit pricey.
Thanks in advance
Steve

This is not an area where you want to have substandard equipment. Bits sold by Tek Tanks, Lee San, Whale and Jabsco are the ones to go for. Makes sure you buy the highest grade hose. You will regret penny pinching on hose, both for ease of fitting durability and smells.

 

[laika]

Aquafax? I note they have a branch in Middlewich, although not having been to that part of the world, I'd check it has a sales counter and isn't just a distribution warehouse.

 

[affinite]

This is not an area where you want to have substandard equipment. Bits sold by Tek Tanks, Lee San, Whale and Jabsco are the ones to go for. Makes sure you buy the highest grade hose. You will regret penny pinching on hose, both for ease of fitting durability and smells.

Thanks for all suggestions.
Yes Tranona - Agree re quality fittings & hose. Im not trying to penny pinch just looking for best value.
BTW the reason for the "project" is because a long waste pipe from the aft heads to the tank has gone pourous (Spell checker please) and is stinking the boat out. I know its going to be a *ugger of a job so whilst Ive got my head down there Im going to install a pump out fitting to keep the Turkish coastguard happy.