Time lapse video of lengthening cruise ship Balmoral by 30 metres

I imagine that internally all the services, ie: electrical wiring, water pipes, air con trunking etc must all have two joints in as a result of the new section. I can't believe that an electrical wire run fore and aft would be replaced. The same with say, a fresh water line, I suppose a new joint each side of the new section is made. Lot's of unseen work to do, apart from glueing the new section in place...:giggle:
 
Norwegian crown became the Balmoral when Fred Olsen bought and extended her.
That explains the Norwegian Crown/Balmoral connection but the Braemar is a different ship altogether although she too was lengthened. The video appears to be a mixture of both vessels being stretched. Still absolutely fascinating to watch.

4.9K views · 95 reactions | Braemar lengthening at Blohm+Voss | In 2007 Fred. Olsen Cruise Lines decided to stretch the cruise ship #Braemar. On 14th May of the following year the ship entered the Elbe 17 Dock at... | By Cruise Spotlight | Facebook
 
Lengthening ships is not that uncommon. About 40 years ago a customer of the bank I worked for had a cargo vessel lengthened to give quite a big percentage increase in carrying capacity and tonnage. No changes were made to propulsion and on sea trial afterwards the ship was faster than it had been when new.
 
When I started working for Research Vessel Services some 25 years ago my boss lent me a video of the RRS Discovery (previous vessel) being lengthened by 10 metres. It got a bit exciting when it nearly fell over as the two sections were moved apart.
 
Top