Rappey
Well-Known Member
I had something like " this post is awaiting moderator approval"Sorry, due to moderator delay,
A pm to them fixed it . Was a mistake which they apologised for.
I had something like " this post is awaiting moderator approval"Sorry, due to moderator delay,
Most routers are not designed to be used inverted due to direction of cooling air sucking dust in. After one of mine packed up with seized bearings, I now use a Triton which is designed for inverted use in the table and has the advantage of built in height adjustment from above.
Over the course of the last 20 years or so, I've notice a trend of proper hardware stores closing, & or being bought out, & the rise of Indian/Pakistani run general pound shop style shops taking over in their place. Very largely, they're just "box shifters" with no technical knowledge or awareness, often English so poor as to make communication impossible (ie imported wife or relative working the till), & the overarching principle is of cheapest alternative is best. Same is true of most of the old motor factors/car spares shops. On top of which you have the rise of 'Mad in China' produced items.Something wrong with Indian run stores then?
I have a Ryobi variable speed drill. Often when I plug it in the drill starts turning (not fast) but I can't stop it. I had trouble with an orbital sander which they replaced under warranty. They took the sander off the market later.
That reply might explain why you have attracted the moderators..Over the course of the last 20 years or so, I've notice a trend of proper hardware stores closing, & or being bought out, & the rise of Indian/Pakistani run general pound shop style shops taking over in their place. Very largely, they're just "box shifters" with no technical knowledge or awareness, often English so poor as to make communication impossible (ie imported wife or relative working the till), & the overarching principle is of cheapest alternative is best. Same is true of most of the old motor factors/car spares shops. On top of which you have the rise of 'Mad in China' produced items.
As the last of the old boys die off, it's making doing technical jobs, finding tools and materials impossible, requiring greater & greater arcs to find any walk in supplier.
Of course, many of the young white kids coming in are just as [differently] bad.
"Have you tried the internet?" is as good as it gets, as they look up from Facebook on their mobile phones.
Over the course of the last 20 years or so, I've notice a trend of proper hardware stores closing, & or being bought out, & the rise of Indian/Pakistani run general pound shop style shops taking over in their place. Very largely, they're just "box shifters" with no technical knowledge or awareness, often English so poor as to make communication impossible (ie imported wife or relative working the till), & the overarching principle is of cheapest alternative is best. Same is true of most of the old motor factors/car spares shops. On top of which you have the rise of 'Mad in China' produced items.
As the last of the old boys die off, it's making doing technical jobs, finding tools and materials impossible, requiring greater & greater arcs to find any walk in supplier.
Of course, many of the young white kids coming in are just as [differently] bad.
"Have you tried the internet?" is as good as it gets, as they look up from Facebook on their mobile phones.
Seems I'm not allowed to reply or defend my position, leaving a distorted impression of them.And while I am my soap box I am sick of the PC Brigade: