Stowe Dataline output

[mikenda - delete]

Identification of the 5 coloured cables outputting from the Databox please. They are Red/White/Brown/green & Black. I assume red & black are pos and neg what are the other 3 ? I am trying to extent the N.M.E A Compass output into a new Radar installation and have 2 input wires marked + & -

<hr width=100% size=1>

 

[Oldhand]

I am afraid I have destroyed my spare Dataline manuals having sold my Dataline equipped boat. As my memory isn't good enough to answer your question, I suggest you contact the below:

Information that may be useful to your members/readers/customers.
My name is Alan Williams of A.W.Marine, Marine Electronics in the U/K. http://awmarine.com We have recently purchased all spares and main line products of Stowe Marine from Simrad, we now supply most parts, service and repair the following ranges :-Navigator, Micro, Dataline and IS11.
We are back into manufacture of many spare parts for the mast head units, transducers etc.
Any enquires please do not hesitate to contact Alan on the main Stowe number +44(0)23 9250 4253 or e-mail info@awmarine.com Best Regards, Alan.


<hr width=100% size=1>

 

[Nick2]

I have a Dataline Chart Plotter and Waypoint + repeater fitted to my boat . I have the instructions for them too so if you think that there may be any relevant information within them that may help you do let me know.

Nick

<hr width=100% size=1><A target="_blank" HREF=http://arweb.co.uk/argallery/Nick2>http://arweb.co.uk/argallery/Nick2</A>

 

[pvb]

Try this...

I think you connect the Dataline white to the + input and the Dataline green to the - input.

<hr width=100% size=1>

 

[mikenda - delete]

Re: Try this...

Spot on I have just come of the phone from A.W Marine who gave the same info Thanks

<hr width=100% size=1>