aerobat
Well-Known Member
Hello gents !
Please watch the attached video i made today. The no load voltage is too high , AND the frequency is completely off , but putting a load on the genny everything seems fine .
put a new 25uf condensator on it and checked that the electrical connectians are ( as far as i was able to check ) correct .
Any electrician here who has an idea what is going on , especially with the frequency ?
I have no idea .
Best regards
Please watch the attached video i made today. The no load voltage is too high , AND the frequency is completely off , but putting a load on the genny everything seems fine .
put a new 25uf condensator on it and checked that the electrical connectians are ( as far as i was able to check ) correct .
Any electrician here who has an idea what is going on , especially with the frequency ?
I have no idea .
Best regards