Stainless steel fittings


Active member
20 Jun 2005
Taunton, Somerset
9 x SS fittings, - 8 straight and one corner piece. made from 3mm thick SS plate and for 8mm diameter screws. The OD of the screw sockets are about 12.5mm.

82mm long by 27mm wide. Approx

These were made to fit under a GRP cockpit sole to be glassed in to improve the screwing down of the cockpit sole plate on my Vega. Someone may have a different use for them.

The original screws on the Vega were just tapped into the GRP directly which was not satisfactory because they were not secure enough and the threads wore through.

£3.50 each or £25 the lot plus postage at cost.
Last edited: