STAINLESS STEEL ENSIGN POSTS

T

toobaz

Well-Known Member
Joined
18 Feb 2002
Messages
111
Location
Chertsey & South Coast
Visit site
Do any of my peers know where I can buy a stainless-steel ensign post? Fed up with these wooden ones, I suppose I could go to a local engineering company, but I thought these would be available on the shelf, to date I've been unable to track them down.
Any Ideas?

<hr width=100% size=1>
 
Have you considered a raggies stanchion post. The long ones are about the right length. the centre hole is just about perfect, and you can get the socket to fit it in, and they are quite cheap to buy. Will probably go this route myself as I also want a stainless pole and have not been able to find one.

<hr width=100% size=1>
 
Marine Superstore, Puerto Solente! Complete with little fixing base for about 20 quid. Available in different sizes, but suitable for up to a 1 yard ensign. Also have neat matching burgee staffs to fix to pulpit rails...

<hr width=100% size=1><A target="_blank" HREF=http://www.fairlinetarga29.info>Buy my boat!</A>
 
Go straight ahead through front door, last but one aisle on the right should have ensigns and flags generally on th erack facing the door. Stand with your back to them (looking at the door), and they were low down in front of you, to the left of all the wooden ones. All packed in clear poly bags.

<hr width=100% size=1><A target="_blank" HREF=http://www.fairlinetarga29.info>Buy my boat!</A>
 
Are you looking for something like this
62a.jpg


And its available from <A target="_blank" HREF=http://www.pcsboatbits.co.uk>http://www.pcsboatbits.co.uk</A> For £8.45 +P&P

Hope this helps.

Cheers..

Alistair..



<hr width=100% size=1>
motorbike.gif
 
Peters Chandlery at Chi have these. I know, 'cos my wife bought one recently from them, along with the ensign.

As for the price, you'll need to ask her, as she was the one who decided to chuck the old one into the harbour, & I insisted that she should be the one to replace it.

R

ps I know where there is one going begging, if you have a snorkel & flippers.

<hr width=100% size=1>
 
Alistair

Thats exactly what I am looking for. Do you have the exact page address on their website. I've had a look but cant find it

Thanks

<hr width=100% size=1>Martyn
 
Ooop, Sorry Martyn,

I didn't see your post there asking for the address.

So <A target="_blank" HREF=http://www.pcsboatbits.co.uk/html/ondeck3.asp>Here</A> it is, about half way down the page..

Hope it works for you.

Cheers...
Alistair...



<hr width=100% size=1>
motorbike.gif
 
You must log in or register to reply here.

Share this page

Top