stainless steel boat names

[baily]

Hi all can you recommend any body that can have boat names laser cut from 316st/st? please.

 

[Sticky Fingers]

Calling @petem ....

Forum member. His website:
Stainless Steel Boat Names – Smart Marine

 

[rafiki_]

Yep, I’ve used PeteM who does a great job, and before Pete started I used Techstainless. They did a great job too.

 

[Chris H]

PeteM

 

[PCUK]

Any local engineering shop will do it!

 

[longjohnsilver]

Any local engineering shop will do it!

I tried several. Petem‘s prices were much keener and the end result was excellent.

 

[petem]

Any local engineering shop will do it!

Good luck finding one that will have mirror polished 2mm or 3mm 31 in stock! Let alone finding one who will give advice regarding fonts and sizing, will polish the edges, will hep with artwork and will provide a fitting template and the correct double sided tape fixings.

 

[petem]

Hi all can you recommend any body that can have boat names laser cut from 316st/st? please.

Thanks for the recommendations everyone!

Baily, I've done loads for fellow forumites over the years and will be happy to assist. You can contact me via my website smartmarine.co.uk.

 

[Simon 420]

On a similar point, our Princess 420 has a transom logo which is now 20 years old and badly faded. Any recommendation as to where I can get a replacement please

 

[Sticky Fingers]

deleted

 

[petem]

On a similar point, our Princess 420 has a transom logo which is now 20 years old and badly faded. Any recommendation as to where I can get a replacement please

Can you post a photo?

 

[Simon 420]

Can you post a photo?