ST50 wind instrument displaying 180 deg the wrong direction

[rundmc]

I replaced my Raymarine Short Arm Wind Masthead Transducer and now my st50 wind display shows the wind coming from the stern if the wind is coming from dead ahead, same any direction its 180 out? its pointing forward direction the same as the old one and im sure it just plugged in to the old socket. Do i need to recal something?
Dave

 

[RichardS]

I believe that the ST50 is similar to my ST60 so you do have to do a full re-calibration by going around in a couple of circles and then setting with the display buttons. It is described in the manual which you can download online if you don't have it.

Richard

 

[sailaboutvic]

I believe that the ST50 is similar to my ST60 so you do have to do a full re-calibration by going around in a couple of circles and then setting with the display buttons. It is described in the manual which you can download online if you don't have it.

Richard

Yep that's right , it say in the manual that once the two full circle have been done you hear a blip , that's isn't right , the blip only happens the very first time you cal it .

 

[rundmc]

HI
Yes I found a ST50plus manual online and it said hold the left button in 2 seconds till it displays CO the press the right button , more than 1 sec jumps 10 degs . and its display ok now
Thanks
Dave