SO35 wiring

[Genoa]

Hi There,
does anyone have a diagram/photos of the conduits for running cables around a Jeanneau SO35?
Mast --> Nav station --> binnacle?
Also suggestions as to where a raymarine gyro compass should go?
Any help gratefully received.

 

[Cerddinen]

SO 35

I have the diagram for a 36.2 which may offer some guidance, but the main point of my post is to suggest you go to the Jeanneau website (www.jeanneau.fr), and find the page for old models. They have the owner's handbook for the 36.2 online and may have a 35 handbook.

 

[Cerddinen]

Handbook

Here is the link you need:

www.jeanneau.fr/doc/proprietaire/manuelproprietaire_2_20080306_Manuel_SunOdyssey35.pdf

 

[mickbond]

SPX5 fitted to SO35

I have fitted the raymarine gyro compass to my SO35. it is a 2 cabin owners version. I fitted th sensor inside the locker between the heads and the chart table fastened to the rear bulkhead just above the waterline. The autopilot callibrated first time and performs very well (spx5 Wheel)

 

[FullCircle]

My fluxgate is in the transom area up quite high away from the steering gear. No problems calibrating.

 

[Genoa]

I have fitted the raymarine gyro compass to my SO35. it is a 2 cabin owners version. I fitted th sensor inside the locker between the heads and the chart table fastened to the rear bulkhead just above the waterline. The autopilot callibrated first time and performs very well (spx5 Wheel)

I thought that was the logical place. Mine is at the back of the "shed" locker. I suspect the 2 bikes in the cockpit locker are a problem ...
Will try and move for the trip back ...