Small metal fabricator?

[Talulah]

I need to get a couple of metal brackets made up.
Total materials is 500mm of 50mm alloy or stainless bar about 5mm thick. (Unpolished)
I can fax a sketch. Anyone on here wanting wanting a small job?

 

[oldsaltoz]

Any small fabrication or engineering shop will do this, check your area phone book.

 

[Cliveshep]

Give my mate Darren a call, at:

BARWELL SPARES & SERVICE LTD Tel. 01234 852915 Fax: 01234 840124
They do all manner of ferrous/non-ferrous fabrication, made my davits, stanchions, cleats, pulpit, petrol tank for an outboard (obselete) all in polished stainless steel. They also do all aluminium, plus brass and copper work. Highly reccomended, mention my name. They'll work from dimensioned sketches and post out. And no, no relationship, and I don't work there but I do use them an awful lot!

 

[BlueChip]

Where are they situated?

 

[jimmy_the_builder]

01234 is Bedford.

Cheers
Jimmy

 

[Cliveshep]

Address is: 3 LYON CLOSE KEMPSTON BEDFORD MK42 7SB

Call them for an e-mail address and you can mail your requirements. Send f.a.o Darren Marsh who is a director.

 

[gerryl]

There is a good chap at Wicormarine. (www.wicormarine.co.uk) but he is quite tall so may not be what you are looking for....

 

[Twister_Ken]

Bengco, at Hamble Point.

http://www.bengco.co.uk/

 

[pappaecho]

Fluid Engineering in Gosport

 

[robbieg]

Fluid do good stuff but very busy with larger work. Small jobs have to be fitted in-no real way of knowing whether you will get it back in a sensible timescale-same for a lot of the marine chaps at this time of year-no credit crunch as far as I can see....