Small Job Stainless Steel Fabrication in Bristol or Plymouth

[ClaireDuet]

Hiya,

I need 4 of these brackets making up in 316 stainless steel:



Does anyone know anyone in Bristol, or Plymouth who'd be willing to do such a small job? Can anyone recommend anyone?

Or, is there anything similar off the shelf anywhere? It's to hold 1" tubing.

My search of the internets has returned nothing yet...

Thank you!

 

[sarabande]

worth asking PCUK; he knows about stainless.

 

[Tim Good]

I have a few stainless jobs that need doing and I'm in Portishead. I think it was these guys I called but havent used them yet: http://www.sdfabricators.co.uk/

I called about making a tube up for my emergency tiller stock and repairing my bathing platforms which isn't really a big job either and they said no problem.

If not then call also:

BUCKLER ENGINEERING SERVICES - 0117 370 9331
Ansell & Wakefield Engineering - 0117 982 7678
BRISTOL WELDING & SHEET METAL - 07715 720071

I'd be keen to know which one you choose and will do a small job.

 

[LadyInBed]

You might find something here
http://www.topbimini.co.uk/?inc=accesoires.php&cat_id=18&tab_id=18

 

[[2574]]

Have a word with Phoenix, helpful guys, located right outside QAB.

http://www.phoenix316.co.uk/

 

[AndrewL]

A few years ago I had a small part made for my table saw by http://pollingerandwarren.co.uk. It only cost £40 so was a small job, but they seemed happy enough to do it. I can't remember exactly where in Bristol, as I emailed a drawing and they mailed the finished item. I'd definitely recommend them though.

 

[LadyInBed]

Have you got a drill, hacksaw and grinder?

http://www.benteler-distribution.co.uk/english/perchcourt/perchcourt-products/index.html

Sections - Stainless steel
Available in Grades 304 and 316, other Grades available on request

U - Channel - 20mm x 10mm to 150mm x 75mm
3.0mm to 9.0mm thickness

 

[alahol2]

You might find something here
http://www.topbimini.co.uk/?inc=accesoires.php&cat_id=18&tab_id=18

Or here... http://www.kayospruce.com/index.asp?selection=category&catref=Cover Accessories&InBox=Deck Fittings&cct=&TypeSearch=&subcat=&pg=0

Looks like most deck hinges utilise a plug in the end of the tube then a narrower hinge plate.