aowen
Member
Can anyone help with a GPS problem I'm struggling with at the moment. I am trying to connect an Evermore SA-320GPS Antenna to a Navman 7100 dsc radio. They have the following wires:
SA320
Red Power Supply
Green Tx Output Signal
White RX Input Signal
Black Power Ground
Gray Shield Wire
Navman7100
Yellow NMEA+ Data In
Green NMEA-Data IN
I've connected the Red Power Supply and the Black Power Ground to the same on the radio.
Have tried both Green/White to Green /Yellow combinations but still no position info on the radio. The NMEA and Baud are the same. So where does the Shield Wire fit in?
SA320
Red Power Supply
Green Tx Output Signal
White RX Input Signal
Black Power Ground
Gray Shield Wire
Navman7100
Yellow NMEA+ Data In
Green NMEA-Data IN
I've connected the Red Power Supply and the Black Power Ground to the same on the radio.
Have tried both Green/White to Green /Yellow combinations but still no position info on the radio. The NMEA and Baud are the same. So where does the Shield Wire fit in?