sea cocks birchwood ts37

[badders]

please forgive my ignorance but am a complete newbie to boats give me trucks and heavy machinery any time I have sort of inheirated a birchwood ts37 flybridge it was in a right mess but with a little from this forum most of it is now sorted one last thing is the sea cocks!! at the moment brown waste water goes into the holding tanks! as the boat is for sea use I want to open the sea cocks and divert waste to them somewhere on the boat must be valves to do this but for the love of mike I don't know where to start looking? anyone got any ideas!!! please


brian ( somewhere up the thames without a paddle)

 

[rafiki_]

You should start by looking around the holding tank. There should be a diverter valve and a mercerator to mash the waste and pump it out to sea. If you can't find these, then maybe no waste to sew, and only pump out?

 

[SEARANGER ANCASTER]

I have just sold a Birchwood ( Not a TS37) and on mine , the seacock for the waste tank was inside a cupboard in one of the cabins so I would look in the nearest one to the tank itself. Otherwise it is going to be below a floor hatch.