Hydrozoan
Well-Known Member
I’ve decided I need to get a couple (initially) of the windows out for refurbishment and wish to plan/make temporary external plywood covers (with rubber strips on the edges to seal against the coachroof sides) to be held in the window gaps by through-bolting to short internal vertical battens.
Unfortunately I’m not on the boat, so I’d be very grateful if anybody is on theirs and would be kind enough to advise on the external window frame sizes and confirm that the minimum clearance around them on the flat part of the coachroof sides is at least 2cm.
Thanks.
Unfortunately I’m not on the boat, so I’d be very grateful if anybody is on theirs and would be kind enough to advise on the external window frame sizes and confirm that the minimum clearance around them on the flat part of the coachroof sides is at least 2cm.
Thanks.