Rocna and Contest 35s

[Paddydog`1]

Does anyone know if a rocna (20kg) will fit on the bow roller of a contest 35s?

 

[Paddydog`1]

Or how can I find out?

 

[[2574]]

Or how can I find out?

On the Rocna website there is a compatability page showing where/how the anchor has fitted on various makes of boat, see here: http://kb.rocna.com/kb/Category:Rocna_bow_compatibility

Regrettably there is not a Contest yacht on there where it has been done before. I designed and had fabricated a double roller for the Rocna 20kg; you are welcome to the design drawings if you want to go down that route. The Nauticat 39 example on the Rocna website is my boat.

rob

 

[RichardS]

On the Rocna website there is a compatability page showing where/how the anchor has fitted on various makes of boat, see here: http://kb.rocna.com/kb/Category:Rocna_bow_compatibility

The Nauticat 39 example on the Rocna website is my boat.

rob

Snap! The Leopard 40 is my boat.

Richard

 

[charles_reed]

A quick search produced this site which offers cut-outs of the various Rocnas.
http://www.rocna.com/product-range/boat-fit

I suggest you download the appropriate guide, cut it out in card and check for yourself.
I'm pretty sure you'll have to modify the roller.

 

[Paddydog`1]

ty 4 your suggestions all