Rocker switch - what does it say?

[PaulRainbow]

I am in the process of refurbishing my new pride and joy (a Four Winns 248 Vista from 2008). One of the many projects is to replace the weather-beaten rocker switches on the helm.

However, I can’t work out what the faded wording is on the the left hand one in this image.

I fell asleep trying to work it out from the Four Winns manual (which doesn’t feature a helm diagram for my late model boat) last night.

I suspect it’s super obvious to one of you learned boaters so grateful for any answers.

The switches on the helm are Carling Contura. All three switches are the same, but with different tops. All you need to replace are the tops.

https://www.carlingtech.com/rocker-switches-v-series

 

[Mileholm]

The switches on the helm are Carling Contura. All three switches are the same, but with different tops. All you need to replace are the tops.

https://www.carlingtech.com/rocker-switches-v-series

Thanks. Super useful.

 

[Mileholm]

Well done sandydog , it’s now obvious what the switch said when it was new but as it doesn’t match the others then someone has clearly used a Neutral Salt switch for something else and tried to erase Neutral Salt………

Just thought I’d follow up to confirm that a marine engineer who was working on my boat has told me the engine has a relatively rare optional Neutra-Salt flushing system. So it appears the switch is correctly labelled and it all adds up. Thanks again for identifying it.

 

[rafiki_]

Just thought I’d follow up to confirm that a marine engineer who was working on my boat has told me the engine has a relatively rare optional Neutra-Salt flushing system. So it appears the switch is correctly labelled and it all adds up. Thanks again for identifying it.

Correct terminology on here for freshwater flushing is “Bodgeflow”. Now trademarked.

 

[Seastoke]

Just thought I’d follow up to confirm that a marine engineer who was working on my boat has told me the engine has a relatively rare optional Neutra-Salt flushing system. So it appears the switch is correctly labelled and it all adds up. Thanks again for identifying it.

That’s good and thanks for informing us.

 

[Mileholm]

I should maybe start a new thread for this, but as it is related to my original topic, I thought I’d just add it here.

Since I cannot find any replacement rocker switch suppliers who have all of what I need pre-labelled, I’ve bought blank ones.

Does anyone here know of any decal/sticker makers who can print bespoke wording to fit blank switches?

 

[harvey38]

I should maybe start a new thread for this, but as it is related to my original topic, I thought I’d just add it here.

Since I cannot find any replacement rocker switch suppliers who have all of what I need pre-labelled, I’ve bought blank ones.

Does anyone here know of any decal/sticker makers who can print bespoke wording to fit blank switches?

I'm pretty sure @petem of this parish is able to custom print blanks. He did a mighty fine job creating a custom switch panel for Tolerance