13 Jun 2022 #1 K kevgarmston New Member Joined 25 Sep 2012 Messages 14 Location Hull Visit site Rival 32 anchors
13 Jun 2022 #2 K kevgarmston New Member Joined 25 Sep 2012 Messages 14 Location Hull Visit site Anyone suggest a suitable anchor that'll fit ?
13 Jun 2022 #3 T Tranona Well-Known Member Joined 10 Nov 2007 Messages 44,489 Visit site As you no doubt know the standard stemhead fitting is very small and not intended for stowing the anchor. The original was a 35lb CQR on chocks on the foredeck.
As you no doubt know the standard stemhead fitting is very small and not intended for stowing the anchor. The original was a 35lb CQR on chocks on the foredeck.
13 Jun 2022 #4 K kevgarmston New Member Joined 25 Sep 2012 Messages 14 Location Hull Visit site Yep, I agree. Thanks ?
14 Jun 2022 #5 M mattonthesea Well-Known Member Joined 28 Nov 2009 Messages 1,525 Location Bristol ayearatsea.co.uk Try on the Rival Facebook page. Lots of ideas for all sorts there
14 Jun 2022 #6 Y yotter Well-Known Member Joined 3 Aug 2007 Messages 798 Location Me Inverkip, boat Kip in winter, Craobh in summer Visit site I know a chap with a Rival 32 and he has a Knox anchor, not sure if stored on the bow roller or deck. He is an excellent fellow Neeves knows who he is
I know a chap with a Rival 32 and he has a Knox anchor, not sure if stored on the bow roller or deck. He is an excellent fellow Neeves knows who he is
15 Jun 2022 #7 R roaringgirl Well-Known Member Joined 1 Nov 2014 Messages 886 Location Half way around: Wellington, NZ. bit.ly I'd recommend an appropriately sized fortress, a small amount of chain and a few tens of metres of nylon rode.
I'd recommend an appropriately sized fortress, a small amount of chain and a few tens of metres of nylon rode.