Ridiculous inflatable instructions

pessimist

Well-Known Member
Joined
7 May 2003
Messages
3,210
Location
Exmoor. Boat in Dartmuff.
Visit site
Bought a new inflatable yesterday. Instruction manual gives precise figures for tube/keep/floor pressures with dire warnings if they are not adhered to. The supplied pump has no guage and I rather doubt it is man enough to reach the the specified floor pressure. Grrr!
 
Bought a new inflatable yesterday. Instruction manual gives precise figures for tube/keep/floor pressures with dire warnings if they are not adhered to. The supplied pump has no guage and I rather doubt it is man enough to reach the the specified floor pressure. Grrr!
Some people use 12v compressor to inflate their boats. Maybe a safeguard against those?
 
I inflate my dinghy so that it is very soft and your backside sinks into the tube. I've never seen any other dinghies which are inflated so low but it just seems to me that it will last longer. As long as it stays on top of the water, I'm happy. ;)

Richard
 
I inflate my dinghy so that it is very soft and your backside sinks into the tube. I've never seen any other dinghies which are inflated so low but it just seems to me that it will last longer. As long as it stays on top of the water, I'm happy. ;)

Richard

I guess that's OK as long as you aren't trying to row against a strong breeze and/or tide. OTOH, most inflatables, no matter how inflated, seem to be OK as long as you aren't trying to row against a strong breeze and/or tide :p
 
Our 12v compressor has a pressure controller on the side - just set the pressure you require and it cuts out when it is attained; just dont ask me about it accuracy !

What type is that please? My widely recommended centrifugal compressor gives up a long way before either tubes or floor are hard and the manual pump is needed to top off.
 
I just destroyed a £1000 paddle board by inflating it to half (10psi) it's working pressure (22psi) in the evening to check that I had successfully fixed a leak. I left it overnight and, unfortunately, for the next rather warm day too. When we came home it was cylindrical, but the leak was confirmed fixed...

If Mr Boyle is to be believed then the temperature inside must have hit something like 50 degrees. That is actually plausible given that the local TV news showed someone cooking eggs on their car bonnet as per the LRDG.

At which juncture the author eats shoots and leaves...
 
Top