TonyMS
Well-Known Member
- Joined
- 16 May 2001
- Messages
- 713
- Location
- Winter St Ives, Cambs; summer Ionian
The Grundfos pump on our barge has stopped working, and we are using our fall-back Jabsco Max Par 2.9.
I'm wondering whether to get the Grundfos repaired, given that it is horribly noisy and uses lots of amps, although it is powerful. As an alternative, I'm tempted by the spec of the Jabsco VFlo Constant Pressure Water System Pump, which would give nearly double the flow of the MAX Par 2.9 - maybe enough to fill the bath and allow a kettle to be filled from another tap, and might not keep switching on and off when drawing off a trickle of water.
I'd welcome any knowledgeable advice.
TonyMS
I'm wondering whether to get the Grundfos repaired, given that it is horribly noisy and uses lots of amps, although it is powerful. As an alternative, I'm tempted by the spec of the Jabsco VFlo Constant Pressure Water System Pump, which would give nearly double the flow of the MAX Par 2.9 - maybe enough to fill the bath and allow a kettle to be filled from another tap, and might not keep switching on and off when drawing off a trickle of water.
I'd welcome any knowledgeable advice.
TonyMS