Re-gluing inflatable tender transom rubbers

[GetItDone]

Hi all,

After a bit of advice!

I've recently picked up a cheap inflatable tender, but the transom rubber mounts onto the tubes have come mostly unglued. It works okay when its inflated as they sort of self locate, but I fear once I put an outboard on it bad things will happen. I want to re-glue these, and I have a plan for tensioning them down, but I'm not sure what sort of glue to use. It's a Plastimo tender and its a fair age.

Pictures attached, and advice appreciated! Many thanks!

 

[GetItDone]

Thinking about using 3M 5200 Fast Cure but open to ideas!

 

[mrangry]

I did mine last year with ct1 and has held up well

 

[Graham376]

I generally use Polymarine 2 part pvc adhesive but old adhesive needs to be removed first which is the worst bit of the job. Instructions on their site or phone them for advice.

Polymarine Paints, Adhesives, Parts & Accessories | Everything to keep RIB's and Inflatables in good repair & great condition

 

[wrr]

If it is hypalon, Bostik 2402, a 2 part adhesive, is the glue of choice.