RayMarine ST6000 Autopilot WindTrim Setup with TackTick Wind System

[truscott]

We have a RayMarine ST6000 autopilot and TackTick T101 Wind System. I'm wondering how I can link them so that I can use the "WindTrim" feature on the Autopilot. As far as I can see, the TackTick sends data directly from the vane to the display and therefore there is no way to get the NMEA signal out to the ST6000.

Is this correct?

Any ideas how I could get this to work?

Cheers in advance.

PT.

 

[truscott]

Should have done some slightly more intensive searching.

The TackTick T122 NMEA Interface appears to be the thing we need.

A basic PDF showing it set up with a Garmin Hand Held and ST4000 is here;
http://www.tacktick.com/files/NMEA_Garmin_Handheld_ Raymarine_ST4000.pdf

Just updating in case anyone else wants to do the same.

Cheers, PT.