Raymarine ST60 cabling question

[Rafiki]

I have a set of these instruments in the cockpit and now want to install a second graphic display at the chart table. All the cabling diagrams show these instruments being "daisy- chained" together with the first and possibly last in the chain receiving the power. Is it possible to break into that daisy chain, say between instrument 3 and 4 and have a T junction with another instrument ( the graphic display) connected only by one cable from the "T". All the data the graphic display needs is already on the ST60 Seatalk network. NB this is NOT Seatalk NG.

Andrew

 

[matthewriches]

Yes ok to cut and shut. You can get a little Seatalk block to do such a thing if all cables have ends on.