Raymarine + Lighthouse 4 (auto-routing)

[Yellow Rose]

New to ybw and have a raymarine + lighthouse 4 (May release) question. Before I go back to Navionics, does anyone know if autorouting is supported? I have tried everything I know to access it but I cannot find it. Axiom 2 running LH4. 6.148

Thank you in advance for any information you may provide.

Chris
S/V Yellow Rose

 

[trevorr]

Hi,

Yes Autoroute is supported on the Axiom 2 with a Navionics Chart.
Instructions are on page 163 on the current lighthouse 4 manual.
Available for download at User Manuals | Raymarine
Browse document Library
Or Here Directly.
Box

Hope that helps

 

[trevorr]

New to ybw and have a raymarine + lighthouse 4 (May release) question. Before I go back to Navionics, does anyone know if autorouting is supported? I have tried everything I know to access it but I cannot find it. Axiom 2 running LH4. 6.148

Thank you in advance for any information you may provide.

Chris
S/V Yellow Rose

Alternatively, Press and hold on the screen where you want to autoroute to, Select more options from the menu, then select Autoroute from that menu.

 

[Ostara24]

It was my understanding that auto routing worked with Navionics charts but not Lighthouse charts?

 

[trevorr]

It was my understanding that auto routing worked with Navionics charts but not Lighthouse charts?

Your understanding is correct.
The OP has Navionics charts running on an Axiom Plotter which uses the Lighthouse software not Lighthouse charts.