Raymarine E120 problem

[stuartwineberg]

I've an E120 networked to an E80 on the flybridge. All was well then the E80 reported "loss of master" and the E120 was blank. Can't make it come back to life but it has power since when you press and hold the power button you get 2 beeps. Any thoughts?

Also, although the unit is nearly three years old, the boat has only done 230 hours - so I reckon the unit has seen less than 30 days usage - fit for purpose?

 

[JerryHawkins]

May be worth going to http://www.raymarine.com , registering and asking the question there. I have used this many times and they normally answer within a day or so.

May be worth disconnecting all connections from the E120. The just re-connect the power and attempt power-on again. Maybe it is powering on but the display is blank; in which case try holding down the soft key next to the power button until the display reboots (this is a full reset). NOTE: This will erase all waypoints, routes etc. So, if you haven't got a backup this could be a real pain for you!