Raymarine cpt200 sidevision transducer

[tonkatoy87uk]

evening.
looking at adding the cpt200 sidevision transducer into our system. Do you need the box aswell or can you just plug it straight into an a98 mfd?

 

[coopec]

I have no idea at all about this unit but do these articles answer your problem?

http://rowlandsmarine.co.uk/content/CPT-200-SideVision-transducer-Installation-instructions-EN.pdf

http://www.fondriest.com/pdf/Raymarine_CP200_CHIRP_SideVision_Sonar_Module_Owners_Manual.pdf

http://raymarine.ning.com/forum/top...tId=6492755:Comment:266778&xg_source=activity

 

[PaulRainbow]

evening.
looking at adding the cpt200 sidevision transducer into our system. Do you need the box aswell or can you just plug it straight into an a98 mfd?

You need the module too.

 

[tonkatoy87uk]

what about for the cpt100dvs that the dragon fly uses?

 

[PaulRainbow]

what about for the cpt100dvs that the dragon fly uses?

Certain Dragonfly MFDs use the CPT-DVS transducer, not the CPT-100-DVS

The CPT-100-DVS should be compatible with your A98 as it replaced the CPT-100 that was formally for the A series MFDs