Quick help pls - VP2003 bulbs

Tintin

Well-Known Member
Joined
21 Mar 2009
Messages
4,822
Location
Kernow
Visit site
Before I do any damage, are the small bulbs on the volvo penta 2003 control panel just push in bayonets?

Thks.
CR
 
Before I do any damage, are the small bulbs on the volvo penta 2003 control panel just push in bayonets?

Thks.
CR

The ones in the warning light module are the same part number as the taco illumination bulb. It might be easier to get that out to look at if no info forthcoming

(The ones in the other gauges are different )
 
Last edited:
.......are the small bulbs on the volvo penta 2003 control panel just push in bayonets?

These are the ones I bought to refurb my spare panel and keep as spares:-

BA7s 12V 2W (281) - 130202 (Pack of 10 - £4.74) From Auto Electrical supplies

If you google BA7 you will see they have two long lugs which implies a push fit (not bayonet), but I can't be sure/remember.
Cheers
Bob
 
Thanks - no damage done - I was assuming they were push in bayonet type but they are push and turn to remove. Thanks again. CR
 
Thanks - no damage done - I was assuming they were push in bayonet type but they are push and turn to remove. Thanks again. CR

BA9s, or MCC ( miniature centre contact), then probably. I suspect the ones for the oil pressure, water temperature and voltmeter are BA7s
 
Top