standfirmrasta
Well-Known Member
Hi
I have a twin prop bow thruster model BP450/900/1300 not sure which one.(Taken those model numbers from the installation manual I have)
Question is,how do I remove the props to clean,replace anode etc.
I have tried to unscrew (Lightly) but no give,do they pull off?
Oh yes, I have removed the centre bolt and the split pin and two bolts in the "cone" of the prop.
Andy
I have a twin prop bow thruster model BP450/900/1300 not sure which one.(Taken those model numbers from the installation manual I have)
Question is,how do I remove the props to clean,replace anode etc.
I have tried to unscrew (Lightly) but no give,do they pull off?
Oh yes, I have removed the centre bolt and the split pin and two bolts in the "cone" of the prop.
Andy