PeteE
Active Member
While we're on the subject of liquid gas entering the piping, I came across a 'yachtblog' type site the other day where a guy was using his Camping Gaz cylinders upside down (i.e. liquid take off) because they fitted better in the locker that wayHe reported no problems - EEK!
As an ex-hot air balloonist I can't see any problem - so long as you don't mind scorched flesh and singed eyebrows (and anything else within a couple of yards radius). Without the proper kit the effect of an unregulated liquid discharge at the nozzle is likely to be a large (uncontrolled) flame - just what you want when plummeting at speed in a balloon (where circumstances require a "silent burn") but not particularly desirable in a confined space.
In ballooning it is common practice to fill slave bottles from a master (propane) but the slaves are fitted with vent valves which prevent overfilling. If you are thinking of doing it always wear heavy gloves and preferably goggles.
As far as use in cold temperatures goes - I have used propane in temperatures of around 16 deg of frost (when my 5 gal water container was a solid block of ice) - as previous posts have noted, butane gives up long before this.