adey
Well-Known Member
http://www.ebay.co.uk/itm/121570308148?_trksid=p2060778.m1438.l2649&ssPageName=STRK:MEBIDX:IT
Project for someone?
(no connection to me)
Project for someone?
(no connection to me)
Passerelle - Besonzoni. Fire damaged on E-bay
- Thread starter adey
- Start date
SEARANGER ANCASTER
Well-Known Member
I am sure I could sort out hoses and reseal the ram without too much trouble if any buyer is interested
Jurgen
Well-Known Member
What about the pump and wiring harness etc?
SEARANGER ANCASTER
Well-Known Member
Yes , pump should not be a problem and any decent sparky should be able to wire it in. I have similair pump units on our website here :http://www.hydraulicpartsdirect.co.uk/powerpacks-powerpacks-c-83_ 84.html
Jurgen
Well-Known Member
Scuse my ignorance but assume the ram on the passerelle is only to lift up and down or is there an addition ram that extends the platform in and out?
SEARANGER ANCASTER
Well-Known Member
There is certainly 2 rams on mine , yes. Sorry I never studied the ebay advert but it does look as though there is only one with it ?
Jurgen
Well-Known Member
Might contact the seller for more info, am looking for a tender solution for our new F43, didn't want to go the Davit route so depending on the cost of the Passerrelle this could be doable
SEARANGER ANCASTER
Well-Known Member
our boat was specced up for the Med , and I was going to take it off and sell it when we bought the boat UNTIL I realised it lifted the dinghy. Brilliant for that.
Jurgen
Well-Known Member
That's what I had planned! Out of interest what size pump would be needed?
SEARANGER ANCASTER
Well-Known Member
Mine runs of a 24vdc powerpack and you will need one for a double acting ram. You may need 12v ?? We stock both , see link above