11 Jul 2019 #1 ghostlymoron Well-Known Member Joined 9 Apr 2005 Messages 9,889 Location Shropshire Visit site I use nitromors for oil based but how do you remove waterbased paint?
11 Jul 2019 #2 anoccasionalyachtsman Well-Known Member Joined 15 Jun 2015 Messages 4,158 Visit site Try soaking it with neat liquid Persil for a while. Or 50/50 with water and boil it if you can, works on most paints.
Try soaking it with neat liquid Persil for a while. Or 50/50 with water and boil it if you can, works on most paints.
13 Jul 2019 #3 ghostlymoron Well-Known Member Joined 9 Apr 2005 Messages 9,889 Location Shropshire Visit site Somewhat disappointed with the response to this. Even trusty hot air gun doesn't work.
13 Jul 2019 #4 Caer Urfa Well-Known Member Joined 28 Aug 2006 Messages 1,877 Location Shropshire groups.yahoo.com Not sure if this is what you want but for removing say boat names etc on GRP I have used this many times and no damage to GRP. Apply and leave on for about 4 hours and just wash off, any faint signs of paintwork I then used 'T' cut and just re-polished job done https://www.glenwooddecoratingsuppl...r-c15/owatrol-dilunet-paint-removing-gel-p149
Not sure if this is what you want but for removing say boat names etc on GRP I have used this many times and no damage to GRP. Apply and leave on for about 4 hours and just wash off, any faint signs of paintwork I then used 'T' cut and just re-polished job done https://www.glenwooddecoratingsuppl...r-c15/owatrol-dilunet-paint-removing-gel-p149