Outboard carb

Yeah ill take a photo and post it up im sure i had it right though scratches head lol . As for sounding harsh at vicS it wasn't meant to its called frustration as it worked before and can't see why it won't now as it will only run with choke or by squeezing the primer bulb .emcm 0035 ill do the photo for you now and post it up cheers matey .
 
image.jpg
emcm0035 said:
Can you post a picture of your fuel pump and the parts that you have already? might be able to give you a better answer seeing all the bits laid out .

I have done quite a few fuel pumps. Most gasket sets I've used in the past contain some bits that aren't always needed but are there for slight various model differences.

Wouldn't go ahead and buy the ones from ebay unless your really sure. Try calling a mariner agent in uk or one local if they are decent and not money grabbers then they should be able to tell you strait away. If the first one doesn't give you any insight try another
Click to expand...


Here you go mate do you notice the slight tear in the gold one hence why im looking for replacements as i don't know if that's not helping my problem either but still need to know how they fit .
 
Last edited:
Just seen your picture of all the parts to the fuel pump and re looked at your previous 2 pictures would say the gold one goes ontop of the rubber gasket due the indents already in the rubber one. What the gold one does couldn't say or if the rip would make a difference. But uselly its a ferrite composit style gasket that goes against the engine side so that might be its reason.

Hope this helps a little
 
emcm0035 said:
Found this on youtube know its not the same engine but might help shed some light on some of your parts and where they might go. Some of the comments make more sense than the video.

https://www.youtube.com/watch?v=vufekxTVZd8
Click to expand...

That video has just confused the hell out of me that guy needed help as well and the comments well what can i say we're saying sort of what im saying he needed help .
all the gaskets in my photos came off it so must go back on it .
Cheers mate .
 
Done the diaphragms not i need help with the float and idle settings has anyone got a workshop manual for one of these outboards or know someone who could post a photo of the carb settings page on here to help me out please as most places on the net expect payment to view it and it might not even be the right manual the manual i need photos of are for a 1984 mariner 50 hp 2 stroke 4 cylinder yes it's old but it's a great engine and yes ive tried iboats thanks for any help in advance .
 
You must log in or register to reply here.

Share this page

Top