Piers
Well-Known Member
Here's an interesting article on the Passage Maker website: https://www.passagemaker.com/technical/troubleshooter-wide-open-throttle
+1.Yep, interesting article Piers, thanks.
I guess the 'fuel burnt' would be a better metric for cars as well as boats?
Correct. There are many sensors on an Eu 6 spec engine, monitoring just about everything. They also use synthetic oil which does not break down like the old mineral oils.I believe that cars with variable servicing base the intervals around average fuel consumption (so not quite actual fuel used, but based around it). So a car used mostly in town for short journeys or driven hard will have shorter intervals than one used for long gentle runs.
Crikey you're a tough judge Porto!!! - standing on your viewing platform and describing someone sailing by in a rather nice Leopard 27m as a wannabe in a POS...some wanna be in a POS running parallel...
I only WOT mine after it’s annual lift and engine service .
No particular desire to go 38 knots ++ in normal service .
Rest of the year it’s 80 % load and 550 degree EGT ,s which equates to 1800 rpm or sometimes 78 % load 1780 ish .
I have got the instruments to do this so why not ?
Occasionally they see over 2000 rpm , ( WOT is 2200 )
1- Nav issues - I feel we need speed up ,—- he gonna X my wash kinda thing , rather us his wash- big stuff super yachts , ferries etc
2- red mist decends , some wanna be in a POS running parallel adjusts speed to overtake , usually after I’ve crept up from behind and overtaken him - fool
Cos I am running @ 27/30 and he’s 24 or something , they all fade away N of 30 .
I thought that kinda thing only happens on the roads , but it happens @ sea too
Here’s an example — yeh I know childish before anybody says
And it’s not Testosterone cos wife was driving - :encouragement: women drivers
https://imgur.com/gallery/YaUpd
What speed are you going at 1800rpm?
You're being a bit harsh on Portofino there Bruce...day trippers in their speed boats and hooligan ways tear up ... and admittedly overtake me ... until ... airborne.
You're being a bit harsh on Portofino there Bruce![]()
in the south area in the middle of this picture, I have anchored this summer at least 5 times,
and I can assure you what you see in this pic, is normal daily habit in that place, without any exception
heavy sports boats (many Itama's ;-) ) pass our boat at nearly planing speed, at less then 5m !!! while guests are swimming behind our boat.
Stabilizers had to work hard there !
boats prefer to ancher here, on the south side of Capri for visiting the Island, instead of the north side, close to the harbour, because on the north side its even worse (we tried the north side only ones)
I almost always give mine a few minutes at WOT toward the end of a run out. Normally when I'm about 10 mins from home I'll blip it up to max for a few minutes, check the revs/speed, check the temperature is stable, then back it back to planing cruise speed for a couple of minutes, then drop it off the plane before entering harbour.
I do it for two reasons.
One, to 'blow the cobwebs out', I figure it can only help to give it a WOT blast occasionally.
Two, to check all is okay. I figure that if something is going to break, or just throw up an issue (like temperature rising) there's a reasonable chance it'll happen at max load, in which case I'm at the end of the day and close to home.
Oh, and three I guess, it's quite fun to end the day with a flat out blast.![]()
Yup, the Faraglioni area is indeed stunning (way better than between the Lerins, possibly with even more boats all around you...in the south area in the middle of this picture, I have anchored this summer at least 5 times,
and I can assure you what you see in this pic, is normal daily habit in that place, without any exception