NSS7 screen

[andythefiddler]

The touch screen on my NSS7 seems to work slightly below and to the right of the point it needs to.

I can’t find a screen reset/calibrate method.

Otherwise it works quite well.

Any ideas?
Any - anyone-please

 

[HissyFit]

The touch screen function will probably be provided by a film layer that is laid over a non-sensitive screen. Such touch sensitive films are available separately for electronic/micro controller constructors. This film could have physically slipped. I'm not sure of the wisdom of opening up the unit to reposition; IP rating could be impacted?

 

[andythefiddler]

The touch screen function will probably be provided by a film layer that is laid over a non-sensitive screen. Such touch sensitive films are available separately for electronic/micro controller constructors. This film could have physically slipped. I'm not sure of the wisdom of opening up the unit to reposition; IP rating could be impacted?

Thanks

 

[Martin_J]

There is a calibration that can be done although I've not tried it recently

NSS touch screen calibration

 

[Martin_J]

That link does get there in the end... can be slow to load and you might have to scroll down past some big Simrad logos

 

[andythefiddler]

Thanks for the help, this worked perfectly.

All now functioning properly.

?