NMEA0183 to SeaTalk1 conversion

[rafal125]

Hi,

I am trying to link a Garmin GPS 128, Clipper Depth, and Clipper Log to a SeaTalk1 bus. Is the Raymarine E85001 the right device to transfer one-way data from NMEA 0183 to SeaTalk1?

 

[PaulRainbow]

It has been discontinued but only had a single NMEA 0183 IN anyway. This would do your job, amongst others;

A033 Bi-directional NMEA 0183 Multiplexer with SeaTalk

 

[rafal125]

Regarding the multiplexer, it has a SeaTalk1 input—can I get something with a SeaTalk1 output?

 

[PaulRainbow]

Regarding the multiplexer, it has a SeaTalk1 input—can I get something with a SeaTalk1 output?

What is it you are trying to do, exactly ?

This looks as though it should fit the bill. CIDRAM

 

[rafal125]

I just bought a boat with some outdated devices, which I am trying to upgrade in terms of functionality.
I have an ST1000+ on board, and I would like to be able to control it remotely via the Navionics app. I came across the Nauti-Control ST WiFi wireless unit with remote—that should be OK in terms of app control, I think.
Now I am trying to get data such as depth, GPS, and SOG into the Navionics app from other devices that use NMEA 0183. My understanding is that if I can find a device that converts this information from NMEA 0183 to SeaTalk1, I could then connect that bus to the Nauti-Control unit, which would transfer the data over WiFi to the Navionics app.
Is this possible to achieve?

 

[PaulRainbow]

I just bought a boat with some outdated devices, which I am trying to upgrade in terms of functionality.
I have an ST1000+ on board, and I would like to be able to control it remotely via the Navionics app. I came across the Nauti-Control ST WiFi wireless unit with remote—that should be OK in terms of app control, I think.
Now I am trying to get data such as depth, GPS, and SOG into the Navionics app from other devices that use NMEA 0183. My understanding is that if I can find a device that converts this information from NMEA 0183 to SeaTalk1, I could then connect that bus to the Nauti-Control unit, which would transfer the data over WiFi to the Navionics app.
Is this possible to achieve?

Not familiar with the Nauti-Control. The Yacht Devices multiplexor should put everything on the Seatalk bus though.

 

[melvynpatrick]

I have a shipmodul WiFi multiplexer. This does what you want I think

 

[PaulRainbow]

I have a shipmodul WiFi multiplexer. This does what you want I think

How much !!

Over £400