Halo
Well-Known Member
After a lot of deliberation I fitted a FlexoFold 3 blader on my with 3YM30 - SD 20. I launched last week and did a trial run on Sunday. Wind speed approx 12Kn and found at least an extra 1/2 kn under sail in all points. Handling under motor is fine and had an indicated 8.2 Kn motoring under max revs.
On reciept I measured the surface roughness of the blades at Ra 0.4 and about 1.0 on the hub. Both were polished to a mirror surface measuring better than Ra 0.2.
Definately recommend this prop so far
(no connection to dealer or manufacturer)
On reciept I measured the surface roughness of the blades at Ra 0.4 and about 1.0 on the hub. Both were polished to a mirror surface measuring better than Ra 0.2.
Definately recommend this prop so far
(no connection to dealer or manufacturer)