Navionics card

[Seastoke]

So our card needs upgrading i believe you can do it your self i have a card reader so should be ok. Now a question we have a repeater plotter on the fly, we use all the time if we put the card in the main plotter will it transfer the new info to the fly plotter.

 

[dunedin]

So our card needs upgrading i believe you can do it your self i have a card reader so should be ok. Now a question we have a repeater plotter on the fly, we use all the time if we put the card in the main plotter will it transfer the new info to the fly plotter.

It depends ! On
- makes of plotters (generally not cross compatible)
- version of plotters and their software (generally needs to be similar models and software version)
- type of cabling between them (NMEA and N2K doesn’t work, needs separate cabl)
if it has been expensively pre-configured to do so, with all equipment of the same brand and age, then possibly. If not, bad luck.

More info might get a fuller answer

 

[Seastoke]

It depends ! On
- makes of plotters (generally not cross compatible)
- version of plotters and their software (generally needs to be similar models and software version)
- type of cabling between them (NMEA and N2K doesn’t work, needs separate cabl)
if it has been expensively pre-configured to do so, with all equipment of the same brand and age, then possibly. If not, bad luck.

More info might get a fuller answer

Thanks for reply its all raymarine , i think c120 saloon and c80 on the fly all kit is raymarine , i think from when the boat was new 2008

 

[Greg2]

I may be wrong but i thought that the C series didn’t network so need a separate card for each plotter?

 

[[165042]]

You're right - only the Raymarine E80 / E120 can network chart / radar data via SeatalkHS - C70/C80/C120 all need individual cards.