Navionics App Update -AIS

Forty_Two

Well-known member
Joined
23 Sep 2002
Messages
1,161
Location
La Napoule/Oxfordshire
Visit site
If anyone is interested here are the generic Wifi settings for what the App is looking for....
Thank you for contacting Navionics.


If you don’t have any of the devices listed in compatibility guide and your Ais receiver allows setting the wifi configurations, you can use one of the below configurations known to the Navionics apps:


ip Address: “0.0.0.0” (or leave empty)

port: 2000,

protocol: "UDP"


ip Address: "192.168.15.1"

port: 39150

protocol:*“TCP”


Best regards,



Marco*

CUSTOMER SERVICE*

Perfect thanks for that info. As soon as I set my Quark A026 to those TCP settings I was able to see AIS on my tablet Navionics.
 

DAVAIS

Member
Joined
9 Jan 2019
Messages
61
Visit site
Happy to know AIS overlay has been supported by Navionics. It works well with my Quark QK-A024 now although the receiver name shows as 'Vesper Marine' one.
 

AMOREST

Member
Joined
26 Jul 2019
Messages
89
Visit site
Hi can you please confirm if anyone has achieved the connection on iPhone or iPad

Tried the settings above in the post but still nothing showing as connected apart from WLN Digital Yacht. Which I don’t have !!

Thanks
 

Andrew_Trayfoot

Active member
Joined
11 Oct 2007
Messages
670
Visit site
Have got it working with my Yakker last night using on my Android phone:

UDP Port: 2000
IP address: 192.168.1.4

got this email today from Navionics:
Thank you for contacting Navionics and we apologize for the delay in the answer.

Please change the Yakker NMEA Wi-Fi receiver settings as below:

IP Address: 192.168.4.1

Port: 1456


Protocol: TCP

Will try it next time i'm out.

Anyone know which is better TCP or UDP
 
Last edited:

AMOREST

Member
Joined
26 Jul 2019
Messages
89
Visit site
Ok all good on IPhone 5s. Navionics showing AIS Targets

Not quite as good as iNavX as the SOG and COG are not displayed as vector. This is particularly useful in the sense of ‘where will we be in 10 minutes time ‘

Thanks for all the input
 

FairweatherDave

Well-known member
Joined
28 Sep 2009
Messages
2,050
Location
Solent
Visit site
Ok all good on IPhone 5s. Navionics showing AIS Targets

Not quite as good as iNavX as the SOG and COG are not displayed as vector. This is particularly useful in the sense of ‘where will we be in 10 minutes time ‘

Thanks for all the input
I've got used to the vector display of AIS in Marine Navigator and like it (unless in a busy part of the Solent). I've been struggling to find a decent demo of the Navionics AIS overlay. Now that a year has passed since the introduction of Navionics AIS I'd be interested what people think of the information displayed. Anyone fancy feeding back?
(My motivation is I fancy heading back to the simplicity of Navionics on my new tablet, and only went with Marine Navigator and VMH because of the AIS that at the time Navionics/Garmin didn't offer)
 

Andrew_Trayfoot

Active member
Joined
11 Oct 2007
Messages
670
Visit site
I've got used to the vector display of AIS in Marine Navigator and like it (unless in a busy part of the Solent). I've been struggling to find a decent demo of the Navionics AIS overlay. Now that a year has passed since the introduction of Navionics AIS I'd be interested what people think of the information displayed. Anyone fancy feeding back?
(My motivation is I fancy heading back to the simplicity of Navionics on my new tablet, and only went with Marine Navigator and VMH because of the AIS that at the time Navionics/Garmin didn't offer)
If you download the Boat Becon app on Android you an use the free trial to feed the AIS data into Navionics and have a play
Not sure if it is available on iOS.
 
Top