andyorr
Member
OK I give up! All I get now is french forecasts! Which letters do I program in to get St. Catherines Point to Lands End forecasts?
Many thanks!!!
<hr width=100% size=1>
Many thanks!!!
<hr width=100% size=1>
NASA NAVTEX programming help
- Thread starter andyorr
- Start date
andyball
New member
poter
Active member
Hi,
do you not have 'auto navtex-all stations in range' ?
as previous post you can manual station select/include on your setup.
poter.
<hr width=100% size=1>
do you not have 'auto navtex-all stations in range' ?
as previous post you can manual station select/include on your setup.
poter.
<hr width=100% size=1>
celandine
Active member
First job: set all stations and all messages to lower case by selecting the -none- option; then set the -e- to upper case on both -stations- and -messages- ; make sure everything else stays in lower case. Go back to standby by pressing enter. You should now get only broadcasts from Niton which covers the area you want.
Mick
<hr width=100% size=1>
Mick
<hr width=100% size=1>