NASA EML-2 Speed transducer

[Jokani]

Dried out at the moment to check if I have this installed correctly.

Instructions say “Install with the ‘arrow’ facing the front”, for the life of me I cannot seen an arrow on the transducer.

Can anyone that has fitted one of these remember where the ‘arrow’ is located?

If not, I’ll have to check with NASA in the week.

TIA

 

[Black Sheep]

The arrow is on the inside - on the top of the transducer, just ahead of the cable exit: a white painted arrow pointing forward.
Underneath (if you're dried out & want to double check) are three studs arranged as the vertices of a right angled triangle. The hypotenuse is to the fore.

 

[Jokani]

Many thanks for that, hopefully that saves me having to dry out again anytime soon. Now to refit it before the tide comes in!

 

[Jokani]

The arrow is on the inside - on the top of the transducer, just ahead of the cable exit: a white painted arrow pointing forward.
Underneath (if you're dried out & want to double check) are three studs arranged as the vertices of a right angled triangle. The hypotenuse is to the fore.

Forgot to say, for some reason there wasn’t a white arrow on mine. Had to look up hypotenuse, but I think I have it correct now.

Thanks again BS.

 

[cpedw]

I (and I suspect many others) would be grateful to hear how well it works, once the orientation is sorted!

Derek

 

[apogee]

Yes, do post how you get on with it.

 

[PaulRainbow]

I fitted one of these last season for a customer. He reports it works well and after calibrating, seems to be accurate.