NASA clipper Duet

[Jack B]

Hi,
The depth sounder part of my NASA Clipper Duet is not working, it reads out. I have replaced the transducer (which includes a new cable to the screen unit) as I had tried requiring the plug on the old transducer, but now I have lost too much cable. Anyhow, the new transducer defiantly works because you can hear it ticking, very occasionally I get a depth reading, normally when I plug the transducer in or I switch it on, but only for a second. Does the panel have any tips on how to rectify the problem?
Many thanks Jack

 

[rivonia]

Simples. You have a break in the continuity. New wiring required.

 

[Jack B]

Sorry to be unclear the new transducer includes a new wire, unless you mean within the screen unit?

 

[northwind]

Hi,
The depth sounder part of my NASA Clipper Duet is not working, it reads out. I have replaced the transducer (which includes a new cable to the screen unit) as I had tried requiring the plug on the old transducer, but now I have lost too much cable. Anyhow, the new transducer defiantly works because you can hear it ticking, very occasionally I get a depth reading, normally when I plug the transducer in or I switch it on, but only for a second. Does the panel have any tips on how to rectify the problem?
Many thanks Jack

Give NASA a call, they are very helpful and can advise you.