bendyone
Well-Known Member
Any one got a copy of a manual for a Nanni 2.5 - 14HP engine. The site at Motoren dose not have a copy.
Nanni Workshop Manual
- Thread starter bendyone
- Start date
DeeGee
Well-Known Member
Is this a Nanni-ized Kubota?
bendyone
Well-Known Member
Yes
DeeGee
Well-Known Member
Re: Nanni/Beta Workshop Manual
OK, presumably it is one of their 2-cylinder jobs.
I was faced with the same problem with my Beta engine. The Beta 'process' adds the sea-water cooling interchange plus one or two other things, I guess, but the principal engine stays the same. Since I could get no works manuals out of Beta, I looked around and found this place - you need the one called 'Kubota Engines and Workshop Manuals'. You get ALL the engines listed there, including yours. Not perfect, but for relatively small change, you have almost exactly what you want. He provided me with a download and a CD that arrived later in the post.
OK, presumably it is one of their 2-cylinder jobs.
I was faced with the same problem with my Beta engine. The Beta 'process' adds the sea-water cooling interchange plus one or two other things, I guess, but the principal engine stays the same. Since I could get no works manuals out of Beta, I looked around and found this place - you need the one called 'Kubota Engines and Workshop Manuals'. You get ALL the engines listed there, including yours. Not perfect, but for relatively small change, you have almost exactly what you want. He provided me with a download and a CD that arrived later in the post.