I think they are the closest I'm going to find. However, they are too long but these the steer led to are not
I'm not sure velcro would be strong enough to support the panels especially with vibration present.
Brilliant range but mainly threaded screws and few wood screws, but thanks for the steer.on eBay, check a shop called Aruncas. Great for SS fixings including what I think you seek.
As my 'photo shows, I already have threaded screws but need wood screws.Is this closer to what your looking for? Ebay item 202905388063
thesecare a bit bigger but may point you in the right direction, just found 5hesevas well, show sizes to M3 ebay
M4 A2 STAINLESS STEEL SLOTTED ROOFING ROOF BOLTS SQAURE NUTS MUSHROOM MACHINE | eBay
Westfield Fasteners are a good source. Bapp Fasteners have most and will will get almost anything in for you if you phone or email them.Pondering covering the grp overlap on the bulkheads, I have produced some hardwood strips from free material milled to leave a small overlap on one edge using a spindle moulder.
I need to fix them to the bulkhead and some, at least, have to be removable as they support the headlining panels.
I am a fan of concealed fixings but, in this case, I am going for screws. Following the maxim, make a defect a feature, I am looking for mushroom head wood screws, stainless of course. So far, looking in vain.
Anyone help please?
Bapp needs a phone/email contact.I've been through all the Westfield (extensive!) list but no joy.
Bapp site produces a blank page.
Bapp needs a phone/email contact.
Or use this:
Insert Nuts Type D M6 x 20mm 50 Pack
Now that is an idea.
And this:
Slotted Mushroom Head Screws M6 in A2 Stainless Steel - Westfield Fasteners Ltd
As in photo.
Or, if your wood is very good, just tap into it.
Probably will- The fixings will be in shear.
Or drill, fill with filled epoxy and drill and tap.
