Murcury smart craft gauges

Ctlangford

New Member
Joined
16 May 2020
Messages
11
Visit site
Hi all.

Was out on my boat yesterday. Few issues. At one point the gauge read 'stbd emergency stop' pretty sure I didn't touch anything, not sure why. Also the fuel percentage fluctuates like crazy, read 106% at one point. On top of that the engine oil reads 0 but has plenty of oil in there. Any advise please?
 
Hi all.

Was out on my boat yesterday. Few issues. At one point the gauge read 'stbd emergency stop' pretty sure I didn't touch anything, not sure why. Also the fuel percentage fluctuates like crazy, read 106% at one point. On top of that the engine oil reads 0 but has plenty of oil in there. Any advise please?
Also the boat is a quicksilver 605 wihh a mariner 115hp and was on 3500rpm doing 8knkts. Is that High?
 
Fuel amount indicated does fluctuate wildly depending on the angle of the boat.
You don’t have a starboard engine so maybe smartcraft not set up or calibrated correctly?
If oil showing as 0 then probably explains the warning message. If full then sensor issue?
 
Top