MD1 dynastart

[kinta]

Hi all.
Some time ago I took my dynastart off for repair. I have forgoten how to re-connect the cabels, does the red cable go on the side terminal? It is a positive earth system.

<hr width=100% size=1>

 

[Kurrawong_Kid]

According to the wiring diagram in the workshop manual,red goes to 30h,blue goes to D-, if fitted, black to D+ and green to DF on the dynastart. These should go to the regulator as follows:red to 30h, blue to 31, if fitted, green to DF and black to D+/31. Hope this helps.

<hr width=100% size=1>