Mistroma
Well-Known Member
I think USB sockets run at 5V, so not sure why 5.2V isnt really useful?
I can understand why less than hoped for current is disappointing but, given that batteries tend to dictate the current drawn, rather than the charger always supplying its max current, i wonder if there might not be a problem? im not saying there isn't, merely maybe.
ive had an ipad tell me there isnt enough current to charge it, so i agree that a USB may not be what it says it is, i.e. 2.1A
I simply meant that 5.2V with no load wasn't really significant as it fell to 4.3V if I tried to take max. 2.5A (1.6 & 0.9) from the charger (it only managed to supply about 0.6A).
If you read both posts you should see that I compared output of several mains and 12V chargers using the same devices. I didn't give details of the devices being charged, tablet and phone, but both were around 50% state of charge. I was comparing output for each charger when supplying the same device.
All I was pointing out was:
1) Mains chargers I'd used seemed to give decent output current and voltage remained at 5V
2) Cheapo 12V charger didn't give anything like the same current and voltage was well below 5V
3) Older cheap 12V charger managed to supply a decent current and voltage remained at 5V
It therefore seemed to be obvious that the newer 12V charger wasn't really performing at anywhere close to the figures quoted. I didn't make the mistake of claiming low output when trying to charge devices already fully charged.
The eBay supplier agreed it wasn't working and immediately refunded my money.
Last edited: